This Blog will guide you through setting up your Halfmind Reminder. The reminder has two different working modes, the explanation is as follows.
Working Modes
Host Mode: Devices will directly connect to your WIFI, which will have relatively high power consumption. A steady power supply from a plug is highly recommended for this working mode.
Satellite Mode: Devices will connect to your Reminders which work in Host Mode. Using batteries or a direct power supply is both OK for this mode.
Activate your first Reminder
Your first Reminder must be activated in Host Mode. You need to download Halfmind Todo on your phone and activate it with this App. Open the App and then turn on the device, you will see a pop-up window in the App. Click “Activate” and follow the guidance. It will require you to give the WIFI name and password to the device. As long as the device is successfully connected to the WIFI, the activation is complete.
Activate other Reminders
The other Reminders could be activated either in Host Mode or Satellite Mode. Follow the same steps above to activate in Host Mode.
If you want to activate the devices in Satellite Mode, just turn on the device and move it close to the Host-Mode ones. You will see the device showing the following notification. Check the username and proceed if it matches yours. If it doesn’t match, check if you are activating with someone else’s device or if there are other devices nearby.
Then the device will show the connection quality, which could help you find the right place to place the current device. Keeping this quality above 20 is highly recommended, and as long as you are satisfied with the place chosen, you can close it and finish the activation procedure.
